THE CITY OF PARIS                                                           MO2010624

2010 ANNUAL REPORT ON WATER QUALITY (Consumer Confidence Report)

This Report Is Not Being Mailed But Is Available At The City Office Or By Calling 660-327-4334

 

This Annual Water Quality Report is presented to customers of the City of Paris, MO and interested parties.  This report is intended to provide you with important information about your drinking water and the efforts made to provide safe drinking water.  If you have any questions about the information presented or need additional information, please contact us at 660-327-4334.

SOURCE OF DRINKING WATER- The City of Paris purchases all water from the CC1 CCWWCMO2020421 Clarence Cannon Wholesale Water Commission.  The water source for the CCWWC is Mark Twain Lake located in Monroe and Ralls Counties, Missouri.  Mark Twain Lake is a surface water reservoir owned and operated by the U.S. Army Corps of Engineers.  The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and groundwater wells.  As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.  Our drinking water is supplied from another water system through a Consecutive Connection (CC).  The Department of Natural Resources conducted a source water assessment to determine the susceptibility of our water source to potential contaminants.  This process involved the establishment of source water area delineations for each well or surface water intake and then a contaminant inventory was performed within those delineated areas to assess potential threats to each source.  Assessment maps and summary information sheets are available on the internet at http://maproom.missouri.edu/swipmaps/pwssid.htm.   To access the maps for your water system you will need the state identification code, which is printed at the top of this report.  The Source Water Inventory Project maps and information sheets provide a foundation upon which a more comprehensive source water protection plan can be developed.  All surface water sources are vulnerable to land use activities within their watershed.  This is why all surface water in Missouri must be treated in dual treatment trains with barriers in place for potential microbiological and chemical contaminants. To find out more about our drinking water sources and additional chemical sampling results, please call at 573-672-3221.  

INFORMATION ON WATER QUALITYDrinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants.  The presence of contaminants does not necessarily indicate that water poses a health risk.  More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline (800-426-4791).

Contaminants that may be present in source water include:

A.           Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

B.           Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming.

C.           Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.

D.           Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.

E.            Radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities.

In order to ensure that tap water is safe to drink, the Department of Natural Resources prescribes regulations which limit the amount of certain contaminants in water provided by public water systems.  Department of Health regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

Some people may be more vulnerable to contaminants in drinking water than the general population.  Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infection.  These people should seek advice about drinking water from their healthcare providers.  Environmental Protection Agency/Centers for Disease Control guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).

 

If you would like be observe the decision-making process that affects drinking water quality or if you have any further questions about your drinking water report, please call us at 660-327-4334 to inquire about scheduled meetings or contact persons.                                                                                                                                  

Regulated

Contaminant Tested

Test  Result

Level Found/Range

MCL

 

MCLG

Possible Sources

of Contaminant

Violations

Atrazine (units ppb)

Collection Date 05/17/10

8.8 Level

0 - 8.8 Range

3

3

 

Runoff from herbicide used on row crops

No

Chromium (units ppb)

Collection Date 11/17/10

2.68 Level

2.68 Range

100

100

Discharge from steel and pulp mills

No

Fluoride (units ppm)

Collection Date 11/17/10

0.29 Level

 0.29 Range

4

4

Natural deposits, water additive which promotes strong teeth.

No

Carbon,Total Organic(TOC)

 ( units ppm) Sample Year 2010

4.9296 Level

2.19-8.2 Range

 

 

Naturally present in the environment.

No

Barium (units ppm)

Collection Date 11/17/10

0.0473 Level

0.0473 Range

2

2

Erosion of natural deposits, discharge of drilling wastes or from metal refineries.

No

Nitrate+Nitrite asN

(units ppm) Sample year 2010

1.9700 Level

1.97 Range                        

10

10

Runoff from fertilizer; Leaching from septic tanks, sewage; Erosion from natural deposits

No

Nitrite (as N)

(units ppm)Sample year 2009

1.0400 Level

1.04 Range

1

1

Runoff from fertilizer; Leaching from septic tanks, sewage; Erosion from natural deposits

No

P-Dichlorobenzene

(units ppb) sample year 2010

0.8800 Level

0.88 Range

75

75

Discharge from industrial chemical factories

No

Nickel (unit MG/L)

Collection Date 11/17/10

0.00322 Level

0.00322 Range

0.1

0.1

Inorganic

Unregulated Contaminant

 

Disinfection Byproducts

 

 

 

 

 

Total HAA5

(units ppb)

sample year 2010

23.5467 Level

16.7-40.6 Range

60

0

By-product of drinking water disinfection

No

TTHM’s (units ppb)

sample year 2010

39.7188 Level

25.8-55.1 Range

80

NA

By-product of drinking water chlorination

No

TURBIDITY

 

 

 

 

 

Turbidity (units NTU)

Occurred July

0.17 Highest

 

 

 

Sources are soil runoff which carries finely suspended organic and inorganic

No

Collection Period

Units

ACTION LEVEL

90th  %                  

RANGE                      

SITES

OVER

Typical Sources

 

Copper-        

2008-2010    

ppm

        1.3

0.289      0.0302-.492

0

 

Corrosion of household plumbing systems.

No

Lead-           

2008-2010

ppb

15

7.300      1.08-8.82

0

Corrosion of household plumbing systems.

No

               

Definitions:

(1)        MCLG:  Maximum Contaminant Level Goal, or the level of a contaminant in drinking water below which

there is no known or expected risk to health. MCLG’s allow for a margin of safety.

(2)        MCL: Maximum Contaminant Level, or the highest level of a contaminant that is allowed in drinking water.  MCL’s are set as close to the MCLG’s as feasible using the best available treatment technology.

(3)        TT :  Treatment Technique, or a required process intended to reduce the level of a contaminant in drinking  water.

(4)        AL: Action Level, or the concentration of a contaminant which, when exceeded, triggers treatment or other requirements which a water system must follow. 

(5)        90th percentile: For lead and copper testing.  10% of test results are above this level and 90% are below this level.

(6)        Level Found:  is the average of all test results for a particular contaminant.

(7)        Range of Detection: Shows the lowest and highest levels found during a testing period, if only one sample was taken, then this number equals the level found.

(8)        MRLDG: Maximum Residual Disinfectant Level Goal, or the level of a drinking water disinfectant below which there is no known or expected risk to health.

(9)        MRDL: Maximum Residual Disinfectant Level, or the highest level of a disinfectant allowed in drinking water.

Abbreviations:

 (1)   ppb: parts per billion or micrograms per liter.                        (2)    ppm: parts per million or milligrams per liter.    

 (3)   n/a: not applicable.                                                                  (4)    ntu: Nephelometric Turbidity Unit, used to measure cloudiness in drinking water  

 (5)   nd: not detectable at testing limits.                                                         (6)   mfl: million fibers per liter, used to measure asbestos concentration

The state has reduced monitoring requirements for certain contaminants to less often than once per year because of these contaminants are not expected to vary significantly from year to year.  Records with a sample year more than one year old are still considered representative.

Special Lead and Copper Notice: If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children.  Lead in drinking water is primarily from materials and components associated  with service lines and home plumbing,  Paris is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components.  When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking.  If you are concerned about lead in your water, you may wish to have your water tested.  Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline(800-426-4791) or at http://water.epa.gov/drink/info/lead/index.cfm.